HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 129)

Command line 129
Item Description
is displayed. Use "*" to display detailed information for all users.
Examples
->show user
Lists all existing users
->show user steve
Displays details of an existing user by name
->show user *
Displays details of all existing users
vcm
Reset the Virtual Connect Manager.
Supported actions: help, reset
Item Description
reset vcm Reset the Virtual Connect Manager. A failover to the backup VCM can also
be specified (optional), if a backup VCM is available.
IMPORTANT: Resetting the VCM causes a temporary loss in connectivity with
the Virtual Connect Manager. If failover is specified and a backup VCM
exists, users are logged off and must reconnect using the backup VCM IP
address.
Syntax
reset vcm [-failover]
Option
Failover Forces a failover from the current primary VCM to the backup VCM.
Examples
->reset vcm
Resets the Virtual Connect Manager
->reset vcm -failover
Resets the Virtual Connect Manager and forces a failover to the backup
VCM (if available)
version
Display CLI version information.
Supported actions: help, show
Item Description
show version Display CLI version information.
Syntax
show version
Example
->show version
Displays CLI version and copyright information
User roles
The following table lists required user roles for CLI commands.