HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 24)

Command line 24
Item Description
->save configbackup
address=ftp://user:[email protected]:2000/new-vc-con
fig-backup
->save configbackup
address=ftp://user:password@[2001::50]:2000/new-vc-config
-backup
Save a configbackup file to a remote FTP server with a user-specified port number
connection-map
Display server-to-target connectivity information for servers with assigned profiles containing DirectAttach
fabrics.
Supported actions: help, show
Item Description
show
connection-map
Display server-to-target connectivity information for servers with assigned profiles
containing DirectAttach fabrics.
Syntax
show connection-map <ModuleID>
Parameter
ModuleID
(required)
The ID of the module for which to display the connection map information. The module
must be a FlexFabric module. The ID is in the format of
<EnclosureID>:<BayNumber>.
Example
->show connection-map enc0:1
Displays the connection map information for the module in bay 1 of enclosure enc0
devicebay
Manage general enclosure device bay settings and information.
Supported actions: help, show
Item Description
show devicebay Display device bays of all enclosures that exist in the Virtual Connect domain.
Syntax
show devicebay [<DeviceBayID>|*]
Parameter
DeviceBayID
(Optional)
The reference ID of a device bay in the domain
The format of the device bay ID is <EnclosureID:DeviceBay>.
Example: “enc0:1” indicates device bay 1 of the local enclosure being managed.
Use "*" to display detailed information for all enclosures.
If EnclosureID is not specified, the default enclosure is the local enclosure where
the Virtual Connect Manager and domain exist.
If a multi-blade server is present, use the DeviceBayID of the monarch bay. This is
the ID value shown by show devicebay.
Examples
->show devicebay
Displays a summary listing of all device bays
->show devicebay *
Displays detailed information for all device bays