HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 25)

Command line 25
Item Description
->show devicebay enc0:2
Displays detailed information for device bay 2 of the local enclosure
->show devicebay enc1:4
Displays detailed information for device bay 4 of a remote enclosure
->show devicebay enc0:5
Displays detailed information for a multi-blade server in device bays 5-8 of the
primary enclosure.
domain
Manage general VC domain settings and information.
Supported actions: delete, help, set, show
Item Description
delete domain Delete the existing VC domain configuration.
Deleting the domain removes the entire VC domain configuration and resets it to the
original defaults. After the domain is deleted, you are logged out and the VCM
resets.
Syntax
delete domain [-quiet]
Option
quiet Suppresses user confirmation prompts. This option is useful when scripting delete
domain operations.
Examples
->delete domain
Deletes the VC domain configuration and prompts for user confirmation
->delete domain -quiet
Deletes the VC domain quietly without prompting for user confirmation (primarily
used in automated scripting scenarios)
Item Description
set domain Modify general VC domain configuration properties, such as the domain name,
domain IP address, and MAC and WWN address pool settings.
Syntax
set domain [Name=<NewName>] [DomainIp=<Enabled|Disabled>]
[IpAddress=<IPAddress>] [SubnetMask=<mask>]
[Gateway=<Gateway>] [DomainIpv6=<Enabled|Disabled>]
[Ipv6Address=<IPv6Address>/<prefix-length>]
[Ipv6Gateway=<IPv6Address>]
[MacType=<VC-Defined|Factory-Default| User-Defined>]
[MacPool=<1-64>] [MacStart=<MAC address>] [MacEnd=<MAC
address>] [WwnType=<VC-Defined | Factory-Default |
User-Defined>] [WwnPool=<1-64>] [WwnStart=<WWN Address>]
[WwnEnd=<WWN Address>] [SingleDense=true|false]
Properties
Name(optional) The new name of the domain. Valid characters include alphanumeric, "_", and ".".
The maximum length of the name is 31 characters.
DomainIP (optional) Enables or disables the VC domain IP address. If enabled, a valid IP address and
subnet mask must be configured. If disabled, DHCP is used to obtain a valid IP
address.
Enabling domain IP address configuration or changing the domain IP address can
cause a temporary loss of connectivity to the VCM. Use caution when changing
these settings.