HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 70)

Command line 70
Item Description
show name-server Display a snapshot of all hosts and direct attached storage devices for the specified
FlexFabric module.
Syntax
show name-server <ModuleID>
Parameter
ModuleID
(required)
The ID of the module for which to display the name server information. The module must
be a FlexFabric module. The ID is in the format of <EnclosureID>:<BayNumber>.
Example
->show name-server enc0:1
Displays the name server information for the module in bay 1 of enclosure enc0
network-access-group
Manage network access groups.
Supported actions: add, help, remove, set, show
Item Description
add network-
access-group
Create a new network access group. After the network access group is created, it can
be added to a network. The maximum supported number of network access groups is
128.
Syntax
add network-access-group <Name>
Parameter
Name (required) The unique name of the new network access group to create. Valid characters include
alphanumeric, "_", "-", and ".". The maximum length of the name is 64 characters.
Example
->add network-access-group DatabaseNetGroup
Creates a new network access group, and then adds it to the domain
Item Description
remove network-
access-group
Remove a network access group from the domain. To remove a network access group,
it cannot be in use by any server profiles. A network access group cannot be deleted if
it is the only one to which a network belongs. The Default network access group cannot
be deleted.
Syntax
remove network-access-group <Name|*>
Parameter
Name (required) The name of an existing network access group in the domain. Use "*" to remove all
removable network access groups.
Examples
->remove network-access-group DatabaseNetGroup
Removes a specified network access group
->remove network-access-group *
Removes all removable network access groups
Item Description
set network-
access-group
Modify an existing network access group.
Syntax
set network-access-group <Name> Name=<NewName>
Parameter
Name (required) The name of an existing network access group to modify