HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 82)

Command line 82
Item Description
show port-protect Display the loop protection and pause flood protection.
Syntax
show port-protect
Example
->show port-protect
Displays the loop protection and pause flood protection
profile
Manage server profiles.
NOTE: For information on nPartitions and assigning a VC profile to an nPar, see the HP Virtual
Connect for c-Class BladeSystem User Guide on the Installing tab of the HP BladeSystem
Technical Resources website ( http://www.hp.com/go/bladesystem/documentation ).
Supported actions: add, assign, copy, help, load, remove, save, set, show, unassign
Item Description
add profile Create a new server profile. After the profile is created, configure the profile using
the "set" subcommand, and additional network, fabric, and FCoE connections
added. The server profile can be assigned to a device bay using the "assign"
subcommand.
Profiles are created without FCoE connections if the QoS type is set to
"CustomNoFcoe". For more information about setting the QoS type, see "qos (on
page 90 )."
Syntax
add profile <ProfileName> [-NoDefaultEnetConn]
[-NoDefaultFcConn] [-NoDefaultFcoeConn] [Nag=<nagName>]
[HideUnusedFlexNICs=<true|false>]
[SNType=<Factory-Default|User-Defined>]
[SerialNumber=<serialnumber>] [UUID=<uuid>]
Parameter
ProfileName The unique name of the new server profile to create
Options
NoDefaultEnetConn Do not add default Ethernet network connections when creating the server profile.
NoDefaultFcConn Do not add default FC SAN connections when creating the server profile.
NoDefaultFcoeConn Do not add default FCoE SAN connections when creating the server profile.
Properties
Nag (optional) Network access group for the profile. The default is the domain default network
access group.
HideUnusedFlexNICs
(optional)
When set to "false," all physical functions of the FlexNICs are enumerated in the
operating system as network interfaces. This includes FlexNICs not mapped to
profile connections. Enumerating unmapped network interfaces might consume
shared resources, even though the interfaces are unused. The default is "true."
SNType (optional) The source of the serial number assignment used during the profile creation. If not
specified, the serial number is assigned according to the VC default domain
settings. Values include "Factory-Default" and "User-Defined".
SerialNumber
(required if the
SNType is
"User-Defined")
A custom user-defined serial number associated with the server profile. When the
profile is assigned to a device bay containing a server, the server inherits the virtual
serial number. The user-defined serial number must start with the pattern VCX01.