HP Laserjet p3015 - Manual (Page 43)

Item Sub-item Sub-item Values Description
IPV4 SETTINGS CONFIG METHOD BOOTP
DHCP*
AUTO IP
MANUAL
Specify the method that TCP/IPv4
parameters are configured on the
HP Jetdirect print server.
BOOTP: Automatic configuration from a
BootP (Bootstrap Protocol) server.
DHCP: Automatic configuration from a
DHCPv4 (Dynamic Host Configuration
Protocol) server. If selected and a DHCP
lease exists, the DHCP RELEASE and
DHCP RENEW menus are available to set
DHCP lease options.
AUTO IP: Automatic link-local IPv4
addressing. An address in the form
169.254.x.x is assigned automatically.
MANUAL: Use the MANUAL SETTINGS
menu to configure TCP/IPv4 parameters.
MANUAL
SETTINGS IP ADDRESS
SUBNET MASK
DEFAULT
GATEWAY
(Available only if the CONFIG METHOD
menu is set to the MANUAL option)
Configure parameters directly from the
product control panel:
IP ADDRESS: The unique IP address
(n.n.n.n) of the product, where n is a value
from 0 to 255.
SUBNET MASK: The subnet mask (n.n.n.n)
for the product, where n is a value from 0 to
255.
DEFAULT GATEWAY: The IP address of the
gateway or router used for communications
with other networks.
DEFAULT IP AUTO IP*
LEGACY
Specify the IP address to default to when the
print server is unable to obtain an IP address
from the network during a forced TCP/IP
reconfiguration (for example, when manually
configured to use BootP or DHCP).
NOTE: This feature assigns a static IP
address that might interfere with a managed
network.
AUTO IP: A link-local IP address 169.254.x.x
is set.
LEGACY: The address 192.0.0.192 is set,
consistent with older HP Jetdirect products.
DHCP RELEASE YES
NO*
Specify whether to release the current DHCP
lease and the leased IP address.
NOTE: This menu displays if the CONFIG
METHOD is set to the DHCP option and a
DHCP lease for the print server exists.
ENWW Configure device menu 31