Enww interpret control-panel messages 155 – HP Laserjet p3015 User Manual
Page 167
Control panel message
Description
Recommended action
EIO <X> DISK NOT FUNCTIONAL
For help press
The EIO disk in slot X is not working correctly.
1.
Turn the product off.
2.
Make sure the EIO disk is inserted
correctly and securely fastened.
3.
If the control panel message continues
to appear, replace the disk.
EIO <X> DISK SPINNING UP
alternates with
<Current status message>
The disk accessory in EIO slot [X] is
initializing.
No action is necessary.
EIO DEVICE FAILURE
To clear press OK
The specified device has failed.
Press the
OK
button to continue.
EIO FILE OPERATION FAILED
To clear press OK
A command attempted an illogical operation. Press the
OK
button to continue.
EIO FILE SYSTEM IS FULL
To clear press OK
The specified file system is full and cannot be
written to.
Press the
OK
button to continue.
EIO IS WRITE PROTECTED
To clear press OK
The file system cannot be written to.
Press the
OK
button to continue.
Event log empty
You are attempting to view an empty event
log by selecting the SHOW EVENT LOG
option from the control panel.
No action is necessary.
INCOMPATIBLE BLACK CARTRIDGE
The print cartridge is for another product.
Replace the print cartridge with a print
cartridge for this product. See
.
For information about print cartridges that this
product supports, see
.
Incorrect
The wrong PIN number was entered.
Reenter PIN number.
INFLATE FAILURE
SEND RFU UPGRADE ON USB DEV PORT
An error occurred during a firmware upgrade. Contact an HP-authorized service or support
provider.
Initializing
Individual tasks are being initialized.
No action is necessary.
INSERT OR CLOSE TRAY <X>
For help press
The specified tray is open or missing.
Insert or close the tray for printing to continue.
INSTALL BLACK CARTRIDGE
For help press
The print cartridge is missing.
1.
Open the top cover.
2.
Install the cartridge.
3.
Close the top cover.
Table 10-1
Control-panel messages (continued)
ENWW
Interpret control-panel messages 155