HP Laserjet p3015 - Manual (Page 168)

Control panel message Description Recommended action
INSUFFICIENT MEMORY TO LOAD
FONTS/DATA
For help press
alternates with
<DEVICE>
To continue press OK
The product received more data than can fit
in its available memory. You might have tried
to transfer too many macros, soft fonts, or
complex graphics. Press the OK button to print the transferred
data (some data might be lost).
Simplify the print job or install additional
memory.
LOAD TRAY 1 [TYPE] [SIZE]
To continue press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty. Load Tray 1 with the requested paper.
If the paper is already in the Tray 1, press the
help button , and then press the
OK button
to print.
To use another tray, remove paper from
Tray 1, and then press the
OK button to
continue.
LOAD TRAY 1 [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty and other trays are available. Press the OK button to use another tray.
To use Tray 1, load it with the requested
paper.
If the paper is already in the Tray 1, press the
help button , and then press the
OK button
to print.
To use another tray, remove paper from
Tray 1, and then press the
OK button to use
another tray.
LOAD TRAY <X> [TYPE] [SIZE]
For help press
The indicated tray is configured for a specific
type and size of paper needed by a print job,
but the tray is empty. All other trays are also
empty. Load the requested paper in the tray.
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY <X> [TYPE] [SIZE]
For help press
A job is sent that requires a specific type and
size that is not available in the tray that is
indicated. Press the OK button to use a type and size
that are available in another tray.
MANUALLY FEED <TYPE> <SIZE> The product is waiting for you to load paper
in Tray 1. If paper is already in the Tray 1, press the help
button , and then press the
OK button to
print.
To use another tray, remove paper from
Tray 1, and then press the
OK button.
MANUALLY FEED <TYPE> <SIZE>
To continue press OK
alternates with
MANUALLY FEED <TYPE> <SIZE>
For help press
The product is waiting for you to load paper
in Tray 1. Load the requested paper into Tray 1 and
press the
OK button.
Table 10-1 Control-panel messages (continued)
156 Chapter 10 Solve problems ENWW