Chapter 3: problem solving, Things to try first – HP CD-Writer Plus Internal 8110i Drive User Manual

Page 51

Advertising
background image

3-1

C

h

a

p

te

r

3

:

P

ro

b

le

m

S

o

lv

in

g

Chapter 3:
Problem Solving

Read this section if you run into trouble with your CD-Writer Plus drive.
If after reviewing the section you need further assistance, call the phone
numbers listed in ”Appendix B: Customer Support”.

Gather the information on page B-1 before calling for assistance. Having
this information ready will greatly facilitate your call.

Things to Try First

These are some basic steps to take when you run into trouble. If the
problem persists, see the “Common Symptoms and Solutions” section.

Does your computer meet the minimum system requirements (see
Minimum System Requirements on page A-1)?

Make sure the computer is plugged in and that each device has power.

Turn off the computer’s power, wait 20 seconds, then turn it on again.

Try the operation with a different CD.

Make sure that you are using the right type of CD (See “Choosing CDs
for Your CD-Writer” on page 2-2.)

Check the Readme file that came with the CD-Writer Plus drive.

Check the free online information resources listed on page B-5.

If your computer has a power-management feature, disable it (see the
manual that came with your computer).

Advertising