HP XP P9500 Storage - Manual (Page 77)

Description Operand
For example, you can specify RCLU
CL1-C.01:CL2-A.01
, but you cannot specify RCLU
CL2-A.01:CL1-C.01 . Also, you can specify RCLU
CL1-C.01:CL1-C.03 , but you cannot specify RCLU
CL1-C.03:CL1-C.01 .
If port-name.host-group-id is not specified, the monitoring
data of all the volumes (LUs) will be exported.
Use this operand when you want to export statistics about
remote copy operations which are displayed in the Usage RCLDEV[[LDKC-CU-id]
:[LDKC-CU-id]][…]|
Monitor tab in the Cnt Ac-S and Continuous Access
Synchronous Z window. By using this operand, you can
export monitoring data about remote copy operations
performed by Continuous Access Synchronous and
Continuous Access Synchronous Z at volumes controlled
by each CU. When statistics are exported to a ZIP file,
multiple ZIP files whose names are beginning with
RCLDEV_
will be output. For details on the statistics
exported by this operand, see Table 19 (page 98) .
When you specify variables LDKC-CU-id, you can narrow
the range of LDKC:CUs that control the volumes whose
monitoring data are to be exported. LDKC-CU-id is an ID
of a LDKC:CU. The colon (:) indicates a range. For
example, 000:105 indicates LDKC:CUs from 00:00 to
01:05.
Ensure that the LDKC-CU-id value on the left of the colon
is smaller than the LDKC-CU-id value on the right of the
colon. For example, you can specify RCLDEV 000:105,
but you cannot specify RCLDEV 105:000.
If LDKC-CU-id is not specified, the monitoring data of all
the volumes will be exported.
Use this operand when you want to export statistics about
remote copy operations which are displayed in the Usage UniversalReplicator
Monitor tab in the Cnt Ac-J and Cnt Ac-J Z window. By
using this operand, you can export monitoring data about
remote copy operations performed by Continuous Access
Journal and Continuous Access Journal Z in the whole
volume. When statistics are exported to a ZIP file, the file
name will be UniversalReplicator.zip. For details
on the statistics exported by this operand, see
Table 20 (page 99) .
Use this operand when you want to export statistics about
remote copy operations which are displayed in the Usage URJNL[[JNL-group-id]:
[JNL-group-id]][…]
Monitor tab in the Cnt Ac-J and Cnt Ac-J Z window. By
using this operand, you can export monitoring data about
remote copy operations performed by Continuous Access
Journal and Continuous Access Journal Z at each journal.
When statistics are exported to a ZIP file, the file name will
be URJNL_dat.zip. For details on the statistics exported
by this operand, see
Table 21 (page 99) .
When you specify variables JNL-group-id, you can narrow
the range of journals whose monitoring data are to be
exported. JNL-group-id is a journal number. The colon (:)
indicates a range. For example, 00:05 indicates journals
from 00 to 05.
Ensure that the JNL-group-id value on the left of the colon
is smaller than the JNL-group-id value on the right of the
colon. For example, you can specify URJNL 00:05, but
you cannot specify URJNL 05:00.
Export Tool command reference 77