HP XP P9500 Storage User Manual
Page 78
Description
Operand
If JNL-group-id is not specified, the monitoring data of all
the journal volumes will be exported.
Use this operand when you want to export statistics about
remote copy operations which are displayed in the Usage
URLU[[port-name.host-group-id]:
[port-name.host-group-id]][…]
Monitor tab in the Cnt Ac-J and Cnt Ac-J Z window. By
using this operand, you can export monitoring data about
remote copy operations performed by Continuous Access
Journal and Continuous Access Journal Z at each volume
(LU). When statistics are exported to a ZIP file, the file name
will be URLU_dat.zip. For details on the statistics
exported by this operand, see
When you specify variables
port-name.host-group-id
, you can narrow the range
of LU paths whose monitoring data are to be exported,
where port-name is a port name and host-group-id
is the ID of a host group. The host group ID must be a
hexadecimal numeral. The colon (:) indicates a range. For
example, CL1-C.01:CL1-C.03 indicates the range from
the host group #01 of the CL1-C port to the host group
#03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than
the value on the right of the colon. The smallest port-name
value is CL1-A and the largest port-name value is CL4-r.
The following formula illustrates which port-name value is
smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b
< … < CL4-a < … < CL4-r
For example, you can specify URLU
CL1-C.01:CL2-A.01
, but you cannot specify URLU
CL2-A.01:CL1-C.01
. Also, you can specify URLU
CL1-C.01:CL1-C.03
, but you cannot specify URLU
CL1-C.03:CL1-C.01
.
If port-name.host-group-id is not specified, the monitoring
data of all the volumes (LUs) will be exported.
Use this operand when you want to export statistics about
remote copy operations which are displayed in the Usage
URLDEV [[LDKC-CU-id]:
[LDKC-CU-id]][…]
Monitor tab in the Cnt Ac-J and Cnt Ac-J Z window. By
using this operand, you can export monitoring data about
remote copy operations performed by Continuous Access
Journal and Continuous Access Journal Z at volumes
controlled by each CU. When statistics are exported to a
ZIP file, multiple ZIP files whose names are beginning with
URLDEV_
will be output. For details on the statistics
exported by this operand, see
When you specify variables LDKC-CU-id, you can narrow
the range of LDKC:CUs that control the volumes whose
monitoring data are to be exported. LDKC-CU-id is an ID
of a LDKC:CU. The colon (:) indicates a range. For
example, 000:105 indicates LDKC:CUs from 00:00 to
01:05.
Ensure that the LDKC-CU-id value on the left of the colon
is smaller than the LDKC-CU-id value on the right of the
colon. For example, you can specify URLDEV 000:105,
but you cannot specify URLDEV 105:000.
If LDKC-CU-id is not specified, the monitoring data of all
the volumes will be exported.
Use this operand when you want to export statistics about
volumes which are displayed in the Monitoring Performance
LDEVEachOfCU[[[LDKC-CU-id]:
[LDKC-CU-id]][…]|
window. By using this operand, you can export monitoring
78
Export Tool