HP USB Hybrid ATSC NTSC QAM FM TV Tuner - Manual (Page 13)

2. Insert the TV tuner (2) into the other end of the USB extender cable.
Connection 1: Connecting with an antenna
NOTE: The antenna cable length is not shown to scale.
To install the TV tuner and connect it to the TV tuner antenna, follow these steps:
1. Insert the TV tuner (1) into a USB port on the computer.
NOTE: Due to power and bandwidth requirements, do not insert the TV tuner into a USB hub.
2. Connect the TV tuner antenna cable (2) to the TV tuner.
3. Connect the remote sensor to a USB port on the computer. Refer to Step 5: Connect the remote
sensor and infrared (IR) emitter cable on page 12 , for details.
NOTE: For additional connection steps, such as adding a television, refer to Chapter 4, Advanced
connections on page 17 .
Step 4: Set up your audio/video connection 9