Troubleshooting, Appendix a troubleshooting, Atroubleshooting – HP USB Hybrid ATSC NTSC QAM FM TV Tuner User Manual

Page 38

Advertising
background image

A

Troubleshooting

For help in troubleshooting problems with your hardware, refer to the following pages.

Problem

Solution

My remote control does not work.

Be sure that you are using the HP Media Remote Control and not an
unsupported remote control.

Be sure that you keep the path between the remote control and the remote
sensor free from obstructions. Refer to

Using the remote control on page 31

in Chapter 5.

If the remote control has worked without any problems until recently, try
replacing the batteries. Refer to

Inserting or replacing the remote control

batteries on page 32

in Chapter 5.

If the remote control works as expected, except for changing channels, you
must reconfigure the software settings for the cable or satellite receiver. Refer
to

Running the Setup Wizard on page 14

in Chapter 3.

Check all cable connections going to and from the TV tuner.

If using a receiver, check the following:

Be sure that the remote sensor is connected to the computer. Refer to

Connection 3: Connecting with satellite TV or cable TV with a receiver
on page 10

in Chapter 3.

Be sure that the IR emitter cable is securely and properly connected
from the remote sensor to the receiver.

Be sure that the receiver is on and receiving power.

Close the multimedia program, restart the computer, and then reopen the
multimedia program.

I am using a TV in my setup, but I
cannot see anything on the TV screen.

Be sure that the TV is properly connected to the computer. Refer to

Adding a TV to

your system on page 22

in Chapter 4.

My TV tuner is connected to a TV
antenna but I do not get a broadcast
signal.

The TV antenna signals are not automatically detected during the setup process.
In order to properly configure a TV antenna setup, you may need to run the Setup
Wizard again.

Picture quality is poor when I watch live
TV.

Be sure that all cables are properly connected.

If you have basic cable, try a signal booster. A weak signal will cause picture
quality to be degraded.

Be sure that you subscribe to the channel you are watching.

I cannot record a movie that is playing
on a premium channel.

Some premium channels use copy protection technology to prohibit or degrade
recorded movies.

34

Appendix A Troubleshooting

Advertising