HP USB Hybrid ATSC NTSC QAM FM TV Tuner User Manual
Page 19
To run the Setup Wizard using Windows Media Center, follow these steps:
1.
Open Windows Media Center from your computer by clicking Start, and then clicking Windows
Media Center.
2.
Click Tasks, click Settings, click General, click Windows Media Center Setup, and then click
Run Setup Again.
3.
Follow the on-screen instructions.
NOTE:
If this is not the first time you have run the Setup Wizard, you will lose any existing
Windows Media Center settings and preferences.
The basic setup for the TV tuner is now complete. The QuickPlay TV window shows one of the
channels discovered during the channel scan. To change the channel, use the controls that are
displayed on the screen after you move the mouse, or use the remote control included with the
computer.
Step 6: Set up your software
15