HP USB Hybrid ATSC NTSC QAM FM TV Tuner - Manual (Page 8)

2 Identifying setup components
Setup components
The following components are included with your TV tuner. Depending on the connection you choose,
some components may not be required.
Component Description
(1) TV tuner antenna Receives standard and high definition digital and analog
broadcast signals.
NOTE: The antenna may look different from the one shown.
(2) Remote sensor Connects to the USB port on the computer. When it is connected,
you can change channels using the HP Media Remote Control.
(3) Audio/video cable Connects a cable or satellite receiver to the TV tuner for higher
audio/video quality compared to RF coaxial (optional). The audio/
video cable includes composite-in, S-Video-in, and 3.5-mm
stereo cable connectors.
NOTE: For information comparing RF coaxial, S-Video, and
composite video, refer to Chapter 4, Advanced connections
on page 17 .
(4) USB extender cable Lengthens the distance from the computer to the TV tuner.
4 Chapter 2 Identifying setup components