HP StorageWorks 2.128 SAN Director Switch User Manual
Page 10
Advertising

10
B Configuring interoperability mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
C Using the HP Remote Switch feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
D Understanding legacy password behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
E Zone merging scenarios. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
F Upgrading firmware in single-CP mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Upgrading HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN
Tables
Advertising
This manual is related to the following products: