HP ProLiant BL620c G7 Server-Blade - Manual (Page 50)

Hardware options installation 50
4. Remove the mezzanine connector cover.
5. Align the mezzanine connector on the optional mezzanine card with the mezzanine connector on the
system board.
CAUTION: To prevent damage to the server blade, apply pressure over the mezzanine
connector when installing the mezzanine card. Do not apply pressure to the edges of the card.
6. Install the mezzanine card. Press down on the connector to seat the card.
7. Install the access panel (on page 16 ).
8. Install the server blade (" Installing a server blade " on page 28 ).
9. Power up the server blade (on page 14 ).