HP ProLiant BL620c G7 Server-Blade - Manual (Page 95)

Troubleshooting 95
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 • "Integrated Management Log (on page 75 )" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation CD or
see "Troubleshooting resources (on page
80 )"
• "Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page 80 )"
2
"Component identification (on page 7 )"
3 System Management Homepage ( https://localhost:2381 )
4 "Power-on problems flowchart (" Server blade power-on problems
flowchart " on page 88 )"
5 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
80 )"
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
(
http://www.hp.com/go/bladesystem/documentation )
• "HP contact information (on page 108 )"
6 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or see "Troubleshooting
resources (on page
80 )"
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
( http://www.hp.com/go/bladesystem/documentation )