HP LaserJet 2300 Printer series - Manual (Page 95)

ENWW Understanding printer messages 93
41.3 UNEXPECTED
SIZE IN TRAY [XX]
alternates with
LOAD TRAY [XX]:
[TYPE] [SIZE]
This is typically caused if two or
more sheets stick together in the
printer or if the tray is not properly
adjusted. 1 Reload the tray with the correct
paper size.
2 Press ( S ELECT button) to
scroll to TRAY XX SIZE= .
Reconfigure the size in a tray so
that the printer will use a tray
that contains the size required
for the print job.
3 If the error does not clear, turn
the printer power off, then turn
the printer power on.
4 If the message persists, contact
an HP-authorized service or
support provider (see
“Contacting HP” on page 123 ).
41.5 UNEXPECTED
TYPE IN TRAY XX
alternates with
LOAD TRAY [XX]:
[TYPE] [SIZE]
The printer detected a paper type
different than what it was expecting. 1 Reload the tray with the correct
paper type.
2 Press ( S ELECT button) to
scroll to TRAY XX TYPE= .
Reconfigure the size in a tray so
that the printer uses a tray that
contains the type required for
the print job.
3 If the error does not clear, turn
the printer power off, and then
turn the printer power on.
4 If the message persists, contact
an HP-authorized service or
support provider (see
“Contacting HP” on page 123 ).
49.XXXXX
PRINTER ERROR A critical firmware error has
occurred. 1 Turn the printer power off, leave
it off for 20 minutes, and then
turn the printer power on.
2 If the message persists, contact
an HP-authorized service or
support provider (see
“Contacting HP” on page 123 ).
50.X FUSER ERROR
For help press A fuser error has occurred. 1 Turn the printer power off and
then turn the printer power on.
2 If the message persists, contact
an HP-authorized service or
support provider (see
“Contacting HP” on page 123 ).
51.X
PRINTER ERROR
alternates with
To continue
turn off then on
A temporary printing error occurred. 1 Turn the printer power off, and
then turn the printer power on.
2 If the message persists, contact
an HP-authorized service or
support provider (see
“Contacting HP” on page 123 ).
52.X
PRINTER ERROR
alternates with
To continue
turn off then on
A temporary printing error occurred. 1 Turn the printer power off, and
then turn the printer power on.
2 If the message persists, contact
an HP-authorized service or
support provider (see
“Contacting HP” on page 123 ).
Message Description Recommended action