HP StoreOnce Backup - Manual (Page 141)

Figure 34 System console showing failed disks (HP D2D2500 Series)
If you are using iLO2
The Remote Console option under iLO2 also allows you to monitor disk status. It provides similar
information to the system console, described in the previous section, and is also password protected.
It uses the same password as the Web Management Interface.
If you have email alerts
If you have configured recipients for email alerts on the Web Management Interface, they will be
notified of a disk failure with a message similar to the following.
Example email from an HP D2D4100/4300 Series Backup System
******************************************************************************
This is a system generated message from your HP StoreOnce D2D Backup System
Email Notification From D2D-CZC8033MWR
31-Mar-2009 8:32:57 : Storage RAID Logical Drive AA587361P98690J9SVP01GCD82
Catastrophically Failed
31-Mar-2009 8:32:57 : Storage RAID Logical Drive AA58736DP98690J9SVP01G5251
Catastrophically Failed
31-Mar-2009 8:32:57 : Physical disk 5QK0AQKG failed
31-Mar-2009 8:32:57 : Physical disk 5QK0AN7T failed
31-Mar-2009 8:32:57 : Physical disk 5QK0ANMP failed
For further information please browse to
https://D2D-CZC8033MWR.emea.hpqcorp.net (https://16.26.133.71)
Please do not reply to this email.
******************************************************************************
Example email from an HP D2D2500 Series Backup System
*********************************************************************
This is a system generated message from your HP StoreOnce D2D Backup System
Email Notification From AB4027
20-May-2008 16:20:54 : Disk failure has occurred but the RAID System is still operational
with full capacity
20-May-2008 16:20:54 : RAID Disk 1 Failed
For further information please browse to
https://AB4027.emea.hpqcorp.net (https://16.26.11.104)
How do I know a disk has failed? 141