5 appliance configuration, Network (configuration), Network configuration – HP StoreOnce Backup User Manual
Page 33
5 Appliance Configuration
The Configuration menu allows you to configure the appliance's network and interface settings
and set up email alerts. The following options are available.
•
•
•
•
•
Network (Configuration)
This page is used to view and edit network settings. It is also used to turn Beacon Mode on and
off.
NOTE:
HP D2D4300 Series only: It is possible to turn off the 1Gb port without switching on the
10Gb port. For this reason a warning is always displayed when you change the network settings.
The following screen shot is taken from an HP D2D4300 Series model.
Network configuration
The details in this section reflect the IP settings that were specified during installation. The HP
StoreOnce Backup System supports DHCP for IPv4 networks and this is turned on by default.
Network (Configuration)
33