HP StoreOnce Backup - Manual (Page 31)

4. Click Add and provide a Host Name and Description. Click Update.
NOTE: A host with the ‘*' wildcard is added by default, which will allow any host to access
a share.
Creating an NFS share
1. Log on to the Web Management Interface for the appliance.
2. Select NAS and display the Shares tab. This tab is used to manage all shares: for both CIFS
and NFS servers.
3. Click Create Share.
4. Provide the following information:
•
Name: the name that will be used to identify the share in Windows
•
Description: a text description of the share (optional)
•
Access Protocol: Select NFS
The Network Path is either <IP address>/nas/<sharename> or <Fully Qualified
domain name>/nas/<sharename>
.
There is also an option to enable Write Protection. This should only be used if you want to
prevent further backup to the share. If you enable it, any backup jobs currently using that
share will fail.
5. Now select the Permissions tab and set the access permissions for that share for each host in
the list. Check the appropriate box: Read/Write Access, Read-Only Access or No Access.
6. Click Update.
Configuring NAS shares for NFS 31