HP StorageWorks 2.32 Edge Switch - Manual (Page 130)

Configuring the switch 130
11. Click Next. A final screen displays a summary of your alert configuration, as shown in
Figure 55 .
Figure 55 New Threshold Alerts dialog box - summary screen
12. Review the configurations. To make any changes, move backwards and forwards through the
configuration screens by clicking Previous and Next.
13. Click Finish. The Configure Threshold Alerts dialog box is displayed, listing the name, type,
and state of the alerts that you just configured.
14. At this point, the alerts are not active. To activate the alerts, click the alert information that
displays in the Configure Threshold Alerts table and click Activate as shown in
Figure 56 .
Figure 56 Configure Threshold Alerts dialog box - activating alerts