HP StorageWorks 2.32 Edge Switch - Manual (Page 190)

Information and error messages 190
Fabric not persisted.
You attempted to refresh or clear
the log, after a fabric was
unpersisted. When you unpersist
a fabric, the corresponding fabric
log is deleted.
Click OK to continue. Ensure the fabric
is persisted before attempting to refresh
or clear the Fabric Log.
Field cannot be blank.
The data field requires an entry
and cannot be left blank.
Enter the appropriate information in
the data field.
File transfer aborted.
You aborted the file transfer
process.
Verify that the file transfer is to be
aborted, then click OK to continue.
HAFM error <error
number 1 through 8 >.
The HAFM application
encountered an internal error (1
through 8 inclusive) and cannot
continue operation.
Contact the next level of support to
report the problem.
Management server
could not log you on.
Verify your username
and password.
An incorrect username or
password (both case sensitive)
was used while attempting to log
in to the HAFM application.
Verify that the username and password
with the customer’s network
administrator and retry the operation.
Management server is
shutting down.
Connection will be
terminated.
The HAFM application is closing
and terminating communication
with the attached product.
Reboot the HAFM appliance. If the
problem persists, contact the next level
of support.
Invalid character in
field.
An invalid character was entered
in the data field.
Remove invalid characters from the
entry.
Invalid name.
One of the following invalid
names was used: CON, AUX,
COM1, COM2, COM3, COM4,
COM5, COM6, COM7, COM8,
COM9, LPT1, LPT2, LPT3, LPT4,
LPT5, LPT6, LPT7, LPT8, LPT9,
NUL, or PRN.
Select a valid name and retry the
operation.
Invalid network
address.
The IP address specified for the
product is unknown to the domain
name server (invalid).
Verify and enter a valid product IP
address.
Invalid port number.
Valid ports are
(0-< nn >).
You have specified an invalid port
number.
Specify a valid port number, in the
range 0 to the maximum number of
ports on the product minus 1. For
example, for a switch with 32 ports, the
valid port range is 0–31.
Table 9 HAFM messages (continued)
Message Description Action