HP StorageWorks 2.32 Edge Switch User Manual
HP Storage
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Element Manager overview
- Managing the edge switch
- Element manager description
- Feature keys
- Using the Element Manager
- Backing up and restoring Element Manager data
- Monitoring and managing the switch
- Hardware view
- Port List view
- Node List view
- Performance view
- FRU List view
- Port operational states
- Link incident alerts
- Threshold alerts
- Configuring the switch
- Configuring identification
- Configuring management style
- Configuring operating parameters
- Configuring preferred path
- Configuring SANtegrity Authentication
- Figure 23 Configure Security Authentication dialog box
- Accessing SANtegrity Authentication tabs
- Setting Authentication Methods
- Using the Software tab
- Figure 27 Configure SANtegrity Authentication Software tab
- Enabling API authentication
- Disabling API authentication on the switch
- Adding the current HAFM appliance to the Permitted Software list
- Removing the current HAFM appliance
- Editing the CHAP Secret for the current HAFM appliance
- Adding an additional HAFM appliance
- Editing the CHAP Secret for another HAFM appliance
- Removing another HAFM appliance
- Enabling OSMS authentication
- Applying changes and confirmation
- Using the Devices tab
- Figure 29 Configure Security Authentication Devices tab
- Understanding the Devices tab display and default settings
- Adding a detached switch
- Populating a Chap secret to a current switch
- Changing a CHAP secret for a switch
- Adding a connected device with CHAP secret to a switch
- Adding a connected device without a CHAP secret to a Switch
- Changing a CHAP Secret for a connected device
- Removing a connected device from my switch
- Changing a CHAP secret for a detached device
- Removing detached device from a switch
- Enabling or disabling E_port and N_port authentication
- Changing enable authentication method
- Changing port authentication state for an authenticated device
- Changing port authentication state for a non-authenticated device with or without a CHAP secret
- Changing port authentication state for a nonmember device (manageable) without CHAP Secret
- Changing the port authentication state for a nonmember device that is not managed
- Applying changes and confirmation
- Using the IP Access Control List tab
- Using the Radius Servers tab
- Differences between the SANtegrity Security Center and the SANtegrity Authentication
- Viewing the Security Log
- Configuring switch binding
- Configuring ports
- Configuring port addresses (FICON management style)
- Configuring the Allow/Prohibit matrix
- Configuring an SNMP agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring the feature key
- Configuring date and time
- Configuring threshold alerts
- Threshold alert configuration parameters
- Creating new alerts
- Figure 51 Configure Threshold Alerts dialog box
- Figure 52 New Threshold Alerts dialog box - first screen
- Figure 53 New Threshold Alerts dialog box - second screen
- Figure 54 New Threshold Alerts dialog box - third screen (Edge Switch 2/24)
- Figure 55 New Threshold Alerts dialog box - summary screen
- Figure 56 Configure Threshold Alerts dialog box - activating alerts
- Creating new alerts
- Modifying alerts
- Activating or deactivating alerts
- Viewing alerts
- Deleting alerts
- Threshold alert configuration parameters
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling and disabling HAFM Basic
- Enabling and disabling Telnet
- Enabling Alternate Control Prohibited
- Backing up and restoring configuration data
- Using logs
- Using maintenance features
- Optional features
- Index
- appA.pdf