Displaying port information, Port properties parameters, 11 port properties dialog box (edge switch 2/32) – HP StorageWorks 2.32 Edge Switch User Manual
Page 50
Monitoring and managing the switch
50
Displaying port information
There are several ways to display the Port Properties dialog box:
•
Double-click a port connector in the Hardware view.
•
Right-click a port connector in the Hardware view and click Port Properties.
•
Double-click the port row in the Port List view table.
•
Right-click a port connector in the Performance view and click Port Properties.
•
Right-click a port’s row in the Port List view and click Port Properties.
•
Right-click a port’s row in the Node List view and click Port Properties.
•
Click a connector, port row, or bar graph in the preceding views or select Product > Port >
Port Properties.
Figure 11
Port Properties dialog box (Edge Switch 2/32)
Port properties parameters
The Port Properties dialog box provides the following information in each of the listed fields:
•
Port Number—The physical port number.
•
Port Name—User-defined port name or description. See ”
instructions.
•
Type—Displayed the port type, as follows:
• G_Port—Displayed if nothing is logged into the port or the port is configured to be a G_Port.
• F_Port—Displayed if a device is logged into the port or the port is configured to be an
F_Port.
• E_Port—Displayed if the port is connected to another switch’s E_Port through an ISL or the
port is configured to be an E_Port.
• FL_Port—Displayed if a loop device is logged into the port.
• FX_Port—Displayed if the port is configured to be an FX_Port.