HP MPX200 Multifunction Router - Manual (Page 16)

Specifies the MTU size for the iSCSI port. Values are: -mtu_size=
•
min (minimum)
•
normal (default)
•
max (maximum)
•
jumbo (jumbo frames)
•
An integer ranging from 582 to 9000
Specifies the port speed in Mb/s. Values are: -port_speed=
•
auto (default)
•
100
•
1000
•
10000
Enables use of software compression for the newly-created route. -swcompress_enable=
•
yes (default)
•
no
•
on
•
off
•
true
•
false
Specifies the TCP port number ranging from 1024 to 65535. -tcp_port=
The default value is 3225.
Specifies the TCP window size for the iSCSI port. Values are: -tcpwindow=
•
8192 (default)
•
16384
•
32768
•
65536
•
131072
•
262144
•
524288
•
1048576
•
2097152
•
4194304
•
8388608
•
16777216
Specifies that the IPv6 link local address is used for the local end of this FCIP route.
This keyword is required unless the -local_ip keyword is used instead. -uselinklocal
Enables use of a VLAN for the newly-created route. Values are: -vlan_enable=
•
yes
•
no (default)
•
on
•
off
•
true
•
false
NOTE: The router must be capable and licensed for FCIP. To view router capabilities, issue the
show features command. See “show features” (page 68) .
16 Command reference