HP MPX200 Multifunction Router - Manual (Page 39)

Example
c:\>rcli modify notification -name="my profile" -event=dm_all -http
/ip=10.0.0.12
Notification "my profile" successfully modified
ping system
The ping system command issues a ping through either the management port or one of the GbE
ports.
Syntax
ping system -ping_ipaddr=IPv4 or IPv6 address
Keywords
Specifies the ping packet size in bytes. -packet_size=
The default value is 56.
Specifies the outbound port either as a number for an Ethernet port, or as mgmt for
the management port. -port=
The default is to use the management port.
Example
c:\> rcli ping system -port=mgmt -ping_ipaddr=10.0.0.11 /ip=10.0.0.12
Reply from 10.0.0.11, time = 1 ms
reboot system
The reboot system command restarts the firmware program in the router.
Syntax
reboot system
Example
c:\> rcli reboot system /ip=10.0.0.12
[10.0.0.12]
Router is restarting...
register system
The register system command
Syntax
register system
ping system 39