HP MPX200 Multifunction Router - Manual (Page 89)

4 Data Migration commands
Data migration is a block-level, online and offline feature introduced in the MPX200 data transport
device. The HP StorageWorks MPX Manager utility provides this optional, licensed feature to
simplify data migration jobs for almost zero downtime, while providing protection against common
user errors.
Before you use data migration commands, ensure that:
•
The router is running firmware version 3.2.3.0 or later.
•
The router is capable of performing data migration.
•
You have installed an appropriate data migration license.
To view the router capabilities and licensing status, issue the show features command. See
“show features” (page 68) .
This chapter provides the description, syntax, and examples of each of the data migration commands
available in the Remote CLI. The commands are listed in alphabetic order. All examples shown in
this chapter are shown from a Microsoft Windows command prompt, but the output is also
applicable to Linux systems.
NOTE: Keywords that apply to all commands are not listed in this chapter. The general keywords
described in “General keywords” (page 12) are optional for every command in this chapter.
To see a list of data migration commands grouped by category, see “Commands by category”
(page 108)
acknowledge migration
The acknowledge migration command removes a completed data migration job from the
router. You must acknowledge jobs to free up the destination LUN before it can become part of
another job.
For an online migration job, the DRLs are flushed to the destination LUN before removing the job.
You must ensure that host access to the source LUN has been terminated before issuing the
acknowledge migration
command.
TIP: To remove jobs that have not yet completed, use the remove migration command.
Syntax
acknowledge migration -dm_jobid=data migration job ID
Example
c:\> rcli acknowledge migration -dm_jobid=0 /ip=10.0.0.12
[10.0.0.12]
Data Migration job 0 removed successfully
add dm_group
The add dm_group command adds a data migration job group.
Syntax
add dm_group -name=data migration job group name
acknowledge migration 89