Inserting a battery (without lock latch), Removing a battery (without lock latch) – HP ProBook 440 G2 Notebook PC User Manual
Page 59
3.
Tilt the battery upward (3) and remove it from the computer (4).
Inserting a battery (without lock latch)
To insert the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Insert the battery into the battery bay, aligning the tabs on the battery (1) with the notches on the
computer.
3.
Tilt the battery (2) down until it is seated.
The battery release latches automatically lock the battery into place.
Removing a battery (without lock latch)
To remove the battery:
CAUTION:
Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work and shut down the computer through
Windows before removing the battery.
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Slide the right battery release latch (1) and slide the left battery release latch (2) to release the
battery.
NOTE:
You can slide the battery release latches simultaneously or you can slide them one at a
time.
Setting power options 49