HP PSC 1510xi All-in-One Printer - Manual (Page 18)

● Envelopes with clasps or windows (they can get stuck in the rollers and they can
cause paper jams)
● Banner paper
We do not recommend copying to the following papers:
●
Any size paper other than letter, A4, 10 x 15 cm (4 x 6 inch), Hagaki (Japan only),
or L (Japan only)
● Paper with cutouts or perforations (unless specifically designed for use with
HP inkjet devices)
● Envelopes
● Banner paper
● Transparency film
● Multiple-part forms or label stock
● Iron-on transfer paper
Load paper
This section describes the procedure for loading different types and sizes of paper
into your HP All-in-One for your copies or printouts.
Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper
flat in a resealable bag. If the paper is not stored properly, extreme changes in
temperature and humidity might result in curled paper that does not work well
in the HP All-in-One.
Load full-size paper
You can load many types of letter, A4, or legal paper into the paper tray of your HP All-
in-One.
To load full-size paper
1.
Open the paper tray door.
2. Pull the paper tray extender toward you, as far as it will go. Flip the paper catch at
the end of the paper tray extender to open the extender the rest of the way.
Warning Legal paper might get caught on the paper tray extender if it is
fully extended when you print onto legal paper. To avoid a paper jam
when using legal-size paper, do not open the paper tray extender.
3. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide to its outermost position.
User Guide 15
Load
originals
and
load
paper