HP PSC 1510xi All-in-One Printer - Manual (Page 68)

To use device update
1.
Do one of the following:
–
Double-click the update .exe file you downloaded from www.hp.com/support .
– When prompted, accept the device update found by the Software Update
utility.
The Device Update Wizard opens on your computer.
2. At the Welcome screen, click Next .
The Select a Device screen appears.
3. Select your HP All-in-One from the list, and then click Next .
The Important Information screen appears.
4. Make sure your computer and device meet the requirements listed.
5. If you meet the requirements, click Update .
A progress bar or other such designator displays.
6. Do not disconnect, shut down, or otherwise disturb your device while the update
is occurring.
Note If you disrupt the update, or an error message indicates the update
failed, call HP support for assistance.
After your HP All-in-One restarts, the Update Complete screen appears on your
computer and a test page prints from your device.
7. Your device is updated. It is now safe to use your HP All-in-One.
Device update (Mac)
The device update installer provides a means to apply updates to your HP All-in-One
as follows:
1.
Use your Web browser to download an update for your HP All-in-One from
www.hp.com/support .
2. Double-click the downloaded file.
The installer opens on your computer.
3. Follow the onscreen prompts to install the update to your HP All-in-One.
4. Restart the HP All-in-One to complete the process.
User Guide 65
Troubleshooting
information