HP PSC 1510xi All-in-One Printer - Manual (Page 24)

5 Use a PictBridge camera
This HP All-in-One supports the PictBridge standard, which allows you to connect any
PictBridge-compliant camera and print photos without using your computer. Check
your camera's user guide to see if it supports PictBridge capability.
Your HP All-in-One features a PictBridge camera port on the front of the device, as
shown below.
Note The camera port only supports USB-equipped digital cameras that
support PictBridge. It does not support other types of USB devices. If you
attach a USB device that is not a compatible digital camera to the camera port,
an error message appears on your computer screen.
Connect a digital camera
The HP All-in-One supports the PictBridge standard, which lets you connect any
PictBridge-compatible camera to the camera port and print JPEG photos contained on
the memory card in the camera. We recommend you connect your camera's power
cable to the camera to conserve battery power.
1.
Make sure the HP All-in-One is turned on and that the initialization process is
finished.
2. Connect your PictBridge-compatible digital camera to the camera port on the
front of your HP All-in-One using the USB cable supplied with your camera.
3. Turn on your camera and make sure it is in PictBridge mode.
–
When the camera is connected correctly, the PictBridge logo appears in the
Copy area of the control panel, next to the number of copies, as shown below.
User Guide 21
PictBridge