HP PSC 1510xi All-in-One Printer - Manual (Page 21)

Load envelopes
You can load one or more envelopes into the paper tray of your HP All-in-One. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
Note For specific details on how to format text for printing on envelopes,
consult the help files in your word processing software. For best results,
consider using a label for the return address on envelopes.
To load envelopes
1.
Remove all paper from the paper tray.
2. Insert one or more envelopes into the far right side of the paper tray with the
envelope flaps up and to the left. Slide the stack of envelopes forward until it stops.
Tip For more help on loading envelopes, refer to the diagram engraved
in the base of the paper tray.
3. Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of envelopes until it stops.
Do not overload the paper tray; make sure the stack of envelopes fits within the
paper tray and is no higher than the top of the paper-width guide.
Load other types of paper
The following table provides guidelines for loading certain types of paper. For best
results, adjust the paper settings each time you change paper sizes or paper types.
Note Not all paper sizes and paper types are available with all the functions
on the HP All-in-One. Some paper sizes and paper types can only be used if
you are starting a print job from the
Print dialog box in a software application.
They are not available for copying or printing photos from a digital camera.
Papers that are only available for printing from a software application are
indicated as such, below.
Chapter 4
18 HP PSC 1500 All-in-One series
Load
originals
and
load
paper