HP OFFICEJET 4500 - Manual (Page 154)

DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name: Hewlett-Packard Company DoC#: SNPRC-0902-01-D
Supplier’s Address:
138, Depot Road, #02-01
Singapore 109683
declares, that the product
Product Name and Model:
HP Officejet 4500 series printer, HP Officejet Advantage 4500 All-in-One printer, HP
Officejet 4575 All-in-One printer
Regulatory Model
Number:
1)
SNPRC-0902-01
Product Options: All
Power adaptor: 0957-2269
conforms to the following Product Specifications and Regulations:
SAFETY: IEC 60950-1:2001 / EN 60950-1:2001 + A11:2004
EN 62311:2008
EMC: CISPR 22:2005 +A1:2005 / EN55022:2006 +A1:2007 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1: 2001 + A2:2005
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
Telecom:
Energy Use:
TBR 21: 1998 3)
FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1+A-2+A-3+A-4+A-5 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005
Regulation (EC) No. 1275/2008
Energy Star Qualified Imaging Equipment Operational Mode Test Procedure
Supplementary Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC,
the EuP Directive 2005/32/EC & the R&TTE Directive 99/5/EC and carries the marking accordingly. In addition, it
complies with the WEEE Directive 2002/96/EC and RoHS Directive 2002/95/EC.
3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,
clause 4.7.1.
4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
5. The product was tested in a typical configuration.
Singapore
11 May 2010
Yik Hou Meng
Product Regulations Manager
Customer Assurance, Business Printing Division
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany www.hp.com/go/certificates
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
Appendix A
150 Technical information