HP MSA Controllers - Manual (Page 23)

Chapter 1 Before You Begin 23
Installation Checklist
Table 1-9 outlines the steps required to install the enclosures and initially configure
the system. To ensure a successful installation, perform the tasks in the order they
are presented.
Table 1-9 Installation Checklist
Step Installation Task Where to Find Procedure
1. Prepare the rack for installation. “Preparing the Rack” on page 27
2. Install the controller enclosure and optional drive
enclosures in the rack. “Rack Installation Overview and
Procedure” on page 28
3. Attach the ear caps. “Attaching the Ear Caps” on page 31
4. Connect the enclosures. “Connecting Controller and Drive
Enclosures” on page 32
5. Connect the power cords. “Connecting AC Power” on page 35
6. Test the enclosure connections. “Testing the Enclosure Connections” on
page 36
7. Obtain IP values. “Obtaining IP Values for Your Storage
System” on page 37
8. Install required host software and drivers, including:
• HBA drivers
• iSCSI Software Initiator
• MSA2000 Family SES Driver “Host System Requirements” on page 39