HP MSA Controllers - Manual (Page 24)

24 HP 2012i Modular Smart Array user guide • January 2013
9. Connect the data hosts. “Connecting Hosts” on page 39
10. Connect the management host. “Connecting Remote Management
Hosts” on page 43
11. Perform initial configuration tasks:
• Set management port IP properties on the
controller enclosure
• Verify that controllers and enclosures have the
latest firmware
• Set the date and time on the controller enclosure
• Configure host ports on the controller enclosure
• Configure Ethernet ports on data hosts
• Configure iSCSI Software Initiator settings on
data hosts
• Edit Registry values for Ethernet adapters on data
hosts.
• Create virtual disks and map volumes
• Test the configuration
“Configuring a System for the First
Time” on page 45
Table 1-9 Installation Checklist (Continued)
Step Installation Task Where to Find Procedure