HP MSA Controllers - Manual (Page 31)

Chapter 2 Installing and Cabling Enclosures 31
Attaching the Ear Caps
The plastic ear caps are snap-on parts that require some care when attaching or
removing them. After the enclosure has been installed in the rack cabinet, attach the
ear caps, which are located in a plastic bag included in the controller enclosure
package.
1. Remove the ear caps from the plastic package.
2. As you attach each ear cap, hold it so that its indent is closest to the chassis.
Figure 2-3 Ear Caps
3. Apply gentle pressure to snap the caps onto the chassis’ ears.
Right ear cap
Left ear cap
Indent
Indent