HP Insight Management Agents - Manual (Page 111)

•
Protocol displays the transport protocol over which this connection is running. The following
values are valid:
◦ IPv4 - The address is an IP version 4 address.
◦ IPv6 - The address is an IP version 6 address.
◦ IPv4z - The address is an IP version 4 address with a zone index.
◦ IPv6z - The address is an IP version 6 address with a zone index.
◦ DNS - The address is a DNS domain name.
◦ Unknown - The address is empty or the address type is unknown.
•
iSCSI Version displays the active version number of the iSCSI specification negotiated on this
connection.
•
Local Address Type displays the local Internet Network Address used by this connection.
•
Remote Address displays the remote Internet Network Address used by this connection.
•
Local Port displays the local transport protocol port used by this connection.
•
Remort Port displays the remote transport protocol port used by this connection.
•
Maximim Receive Data displays the maximum data payload size supported for command or
data PDUs able to be received on this connection.
•
Maximum Send Data displays the maximum data payload size supported for command or
data PDUs to be sent on this connection.
•
Receive Marker displays whether or not this connection is receiving markers in in its incoming
data stream.
•
Send Marker displays whether or not this connection is inserting markers in in its outgoing
data stream.
•
Header Integrity displays the iSCSI header digest scheme in use within this connection. The
following values are valid:
◦
none
◦ other
◦ noDigest
◦
crc32c
•
Data Integrity displays the iSCSI data digest scheme in use within this connection. The following
values are valid:
◦ none
◦ other
◦ noDigest
◦ crc32c
Storage agent 111