HP Insight Management Agents - Manual (Page 12)

When the System Management Homepage is launched for the first time on operating systems other
than those from Microsoft and Linux, anonymous access to information is available without logging
in.
Deploying the configurations to servers running Microsoft Windows
On systems running Microsoft OS, anonymous access is disabled by default.
To turn on anonymous access, complete the following steps:
1. Open the System Management Homepage
2. Select Settings>SMH>Security>Anonymous/Local Access.
3. Select either of the following access types:
•
Anonymous
•
Administrator
Deploying the configurations to servers running Tru64 UNIX
Under Tru64 UNIX, the location of the WEBAGENT.INI file depends on whether the Management
Agents for Tru64 UNIX were installed as part of the base operating system or as an upgrade. You
can determine the location of the WEBAGENT.INI file by issuing the following command:
The command output resembles one of the following lines:
# ps -ef | grep -i cpqthresh_mib | grep -v grep
root 12278 1 0.0 ... /usr/sbin/cpqthresh_mib
root 12278 1 0.0 ... /var/opt/CPQIM100/bin/cpqthresh_mib
Use the path name displayed in the output of the ps command to locate the WEBAGENT.INI file
on your system as follows:
•
The WEBAGENT.INI file is located in the directory /var/im/webagent if the pathname is
/usr/sbin/cpqthresh_mib.
•
The WEBAGENT.INI file is located in the directory /var/opt/CPQIMddd/web/im/webagent
if the pathname is /var/opt/CPQIMddd/bin/cpqthresh_mib, where the value ddd indicates
the version of the Management Agents installed on the system.
The Web Agent service must be stopped and restarted for any changes to take effect for Tru64
UNIX operating systems.
Deploying the configurations to servers running Linux
The configuration settings for the Management HTTP Server are stored in three files. The passwords
for the Management HTTP Server are stored in /var/spool/compaq/wbem/cpqhmmd.acl.
The configuration settings for the Management HTTP Server that existed through version 3.x is
stored in /var/spool/compaq/wbem/homepage/cpqhmmd.ini.
The configuration settings for the Management HTTP Server that were introduced in version 4.x
and later are stored in /var/spool/compaq/wbem/homepage/cpqhmmdx.ini.
To deploy the Management HTTP Server configuration to other servers, copy the corresponding
ACL file and INI files previously listed.
Three types of data exists:
•
Default (read only)
•
Sets (read/write)
•
Reboot (read/write).
The .INI files located in /opt/compaq/webagent are the configuration files used by the
Web-Enabled HP Insight Management Agents.
12 HP Insight Management Agents for servers