HP Insight Management Agents - Manual (Page 71)

Array Controller Information
This section displays the following information about array controllers that are installed in a storage
system.
•
Model displays the model name of the controller card.
•
Firmware Version displays the version of the controller's firmware.
•
Serial Number displays the serial number of the controller. Use this information for identification
purposes.
•
Product Revision displays the product revision of the controller. Use this value to further identify
a particular revision of the controller model.
•
World Wide Port Name displays the unique Fibre Channel port name for the controller. Use
this value to further identify a particular controller.
•
World Wide Node Name displays the unique Fibre Channel node name for the controller.
Use this value to further identify a particular controller.
•
Rebuild Priority displays the logical drive rebuild priority of the controller. The following values
are valid:
◦ Low - indicates the rebuild priority is low.
◦ Medium - indicates the rebuild priority is medium.
◦ High - indicates the rebuild priority is high.
◦ Unknown - indicates that the rebuild priority is not recognized. You may need to upgrade
the Storage Agents.
•
Expand Priority displays the logical drive expand priority of the controller. The following values
are valid:
◦ Low - indicates the expand priority is low.
◦ Medium - indicates the expand priority is medium.
◦ High - indicates the expand priority is high.
◦ Unknown - indicates that the expand priority is not recognized. You may need to upgrade
the Storage Agents.
•
Controller Status displays the status of the controller hardware. The following values are valid:
OK - The controller is operating normally. ◦
◦ Failed - The controller has failed and is no longer operating.
◦ Offline - The controller is offline.
◦ Redundant Path Offline - There are multiple connection paths to this controller. At least
one connection path is available and at least one connection path is not available.
◦ Unknown - Indicates that the Storage Agents are unable to determine the status of the
controller. You may need to upgrade the Storage Agents.
•
Current Role displays the array controller's current role for duplexed array controllers. The
following values are valid:
◦ Not Duplexed - This array controller is not duplexed.
◦ Active - This duplexed array controller is the active controller.
Storage agent 71