HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 149)

148 7 Printer Control Panel Messages EN
INSTALL IMAGING
DRUM
OPEN FRONT DOOR The printer has detected that
the imaging drum is not
installed. Install the imaging drum
before attempting to print. If
the condition persists, take the
imaging drum out and reinstall
it.
Note: The imaging drum must
be installed and the upper
lever must be to the left in
order for the color toner
carousel to rotate.
For more information on
installing the imaging drum,
see the getting started guide
or the installation guide
included with the drum kit.
INSTALL
TRANSFER DRUM
OPEN RIGHT DOOR The printer has detected that
the transfer drum is not
installed. Install the transfer drum
before attempting to print. If
the condition persists, take the
transfer drum out and reinstall
it. For more information on
installing the transfer drum,
see the getting started guide
or the installation guide
included with the transfer kit.
LANGUAGE =
<XXXX> Displayed during start up.
<XXXX> is the printer control
panel display language.
No action is required. For
more information on changing
the printer control panel
display language, see
“
Selecting the Display
Language ” in chapter 2 .
LEFT
OUTPUT BIN FULL The left output bin on the
printer is full. Remove all media from the
left output bin of the printer to
continue printing.
Message Description Recommended Action