HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 82)

EN Printing from Trays 2 (some printer models only) and 3 81
5 Adjust the left media guide by
pushing it in (A) and lifting up and out
(B).
Note
Lift here (C) to remove paper from the
tray.
6 Position the left media guide over the
correct media size marked on the
input tray.
7 Press the left media guide into the
rear slot (D), and then lower it down
(E) into the front slot (F). Verify the
guide is not skewed.
8 Load up to 500 sheets of 20 lb
(75 g/m
2
) bond paper in the input
tray. For information on loading
different types of media, see
“
Orienting Media for All Other Trays ”
later in this chapter.
CAUTION
Do not fill the input tray above the
media-fill mark. Excessive media in the
input trays can cause media jams.