HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 75)

74 3 Common Printing Tasks EN
Printing from Tray 1
Load up to 100 sheets of 20 lb (75 g/m
2
)
bond paper in tray 1.
CAUTION
To avoid media jams, never add or
remove media from tray 1 while the
printer is printing from tray 1.
To load media into tray 1
1 Open tray 1.
2 Slide the media width guides to the
size that matches the media.
3 Load up to 100 sheets of 20 lb
(75 g/m
2
) bond paper into the input
tray face up, with the long edge of the
letter- or A4-sized media toward the
printer. For more information on
loading other sizes into tray 1, see
“
Orienting Media ” later in this chapter.
Note
Do not fill the input tray above the
media-fill mark on the media guides.
4 Slide the media into the printer as far
as it will go (until the leading edge
rests lightly against the printer) and
adjust the media width guides until
the media fits squarely and firmly
between the media width guides
without bending the media.
5 Use the control panel to select the
size and type of media in tray 1 (see
Configuring Media Type and Size in
chapter 2 ).