HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 159)

158 7 Printer Control Panel Messages EN
TRAY X LOAD
<Type> <Size>
CHECK CONTROL
PANEL SETTING A user has requested a media
size that is not currently
installed or configured in the
printer. This message is also
generated when the current
input tray runs out of media
and no other auto-selectable
input trays contain that size of
media.
X is the input tray number.
<Type> is the last media type
configured for the input tray.
<Size> is the last media size
configured for the input tray.
Load the media type and size
specified on the printer control
panel display, and configure
the media type in the printer
control panel. After the
requested input tray is loaded,
the printer automatically goes
online.
Pressing G O will cause the
printer to attempt to print the
page on the default type and
size media.
If the condition persists, check
the input tray type and size
configuration in the printer
control panel. The correct
media type and size might be
loaded in the input tray, but
the printer will not recognize
that the media is loaded if the
printer control panel settings
do not match the media type
and size requested.
For more information on
configuring input trays, see
“
Configuring Media Type and
Size ” in chapter 2 .
TRAY X OPEN An input tray is open.
X is the input tray number.
Close the input tray before
resuming printing.
Message Description Recommended Action