HP NonStop G-Series - Manual (Page 32)

Configuring the MSMM Server on the NonStop
System
Mid-Range Silo Media Manager Installation and User’s Guide — 541530-003
3 -2
Configuring the MSMM Server on the NonStop
System
Configuring the MSMM Server on the NonStop
System
1. Type RUN CONFIG at the TACL prompt where MSMM is installed.
2. Type a password and press enter.
A menu scrolls up with configuration options. Figure 3-2 shows the Configuration
menu.
Figure 3-1. RUN CONFIG
Note. The file TSIMMSP is created after the password is entered. If you ever forget your
password, purge this file and create a new password. A new TSIMMSP file will then be
created.