HP NonStop G-Series - Manual (Page 60)

Configuring the MSMM Server on the NonStop
System
Mid-Range Silo Media Manager Installation and User’s Guide — 541530-003
3- 30
Verifying the Host Port Number
Verifying that the Host Port and EMS Messaging Numbers
are Established
Once the MSMM GUI is connected, verify that both of the host port and host EMS
messaging port numbers are both in an established state (See
Figure 3-29 ):
1. At the TACL prompt, type “SCF”
2. Type “STATUS PROCESS,TCP/IP PROCESS NAME>”
3. Type “EXIT”.
Figure 3-29. Verifying the Host Port and EMS Messaging Numbers Established
Host Port and EMS
Messaging Number
Established