HP NonStop G-Series - Manual (Page 70)

Configuring the MSMM Client on the NonStop
System
Mid-Range Silo Media Manager Installation and User’s Guide — 541530-003
4 -8
Running the Client Processes
Running the Client Processes
Once the MSMM client has been configured, the TCP/IP Process Name PARAM needs
to be set and the process executed before you use the GUI to connect to the robot.
To run the MSMM client, exit the configuration menu by typing EXIT at the prompt.
When the TACL prompt appears, type the following as shown in
Figure 4-8 .
Figure 4-8. OBEY GO