HP ProLiant ML350 G4 Server - Manual (Page 105)

Server Software and Configuration Utilities 105
When the server boots, the system identifies whether the current ROM bank is
corrupt. If a corrupt ROM is detected, the system boots from the backup ROM
and alerts you through POST or IML that the ROM bank is corrupt.
If both the current and backup versions of the ROM are corrupt, the server
automatically enters ROMPaq disaster recovery mode.
USB Support
HP provides both standard USB support and legacy USB support. Standard
support is provided by the operating system through the appropriate USB device
drivers. HP provides support for USB devices before the operating system
loading through legacy USB support, which is enabled by default in the system
ROM. HP hardware supports USB version 1.1 or 2.0, depending on the version
of the hardware.
Legacy USB support provides USB functionality in environments where USB
support is normally not available. Specifically, HP provides legacy USB
functionality for:
•
•
•
•
•
POST
RBSU
Diagnostics
DOS
Operating environments which do not provide native USB support
For more information on ProLiant USB support, refer to the HP website
(
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html ).
Diagnostic Tools
List of Tools:
Array Diagnostic Utility ............................................................................................................. 106
HP Insight Diagnostics ............................................................................................................... 106
Integrated Management Log....................................................................................................... 106