HP Photosmart D5345 Printer - Manual (Page 95)

Solution: Make sure the paper is loaded correctly.
For more information, see:
“Load full-size paper” on page 18
Cause: More than one type of paper is loaded in the input tray.
Solution: Load only one type of paper at a time.
Cause: The Two-sided printing accessory might not be securely installed.
Solution: Make sure the Two-sided printing accessory on the back of the
HP Photosmart is securely installed.
Paper is not picked up from the input tray
Cause: There is not enough paper in the input tray.
Solution: If the HP Photosmart is out of paper or there are only a few sheets
remaining, load more paper in the input tray. If there is paper in the input tray, remove
the paper, tap the stack of paper against a flat surface, and reload the paper into the
input tray. Follow the prompts on the display or the computer screen to continue your
print job.
For more information, see:
“Load full-size paper” on page 18
Print troubleshooting
Use this section to solve these printing problems:
• Envelopes print incorrectly
• Borderless printing produces unexpected results
• The HP Photosmart is not responding
• The HP Photosmart prints meaningless characters
• Nothing happens when I try to print
• The pages in my document came out in the wrong order
• The margins are not printing as expected
• Text or graphics are cut off at the edge of the page
• A blank page came out while printing
• Ink is spraying the inside of the HP Photosmart when I print a photo
Envelopes print incorrectly
Cause: A stack of envelopes is loaded incorrectly.
Solution: Remove all paper from the main input tray. Load a stack of envelopes in
the main input tray, with the envelope flaps facing up and to the left.
NOTE: To avoid paper jams, tuck the flaps inside the envelopes.
Chapter 11
94 Troubleshooting
T
roub
les
hoot
ing